China Huading SWC Wf Type Flange Transmission Part Industrial Cardan Shaft No Length Compensation pto shaft extension

Merchandise Description

SWC WF No Telescopic Flange Cardan Shaft(JB/T5513-ninety one)

♦Description
SWC WF variety Cardan shaft coupling is a type of the most generally employed with the attributes of its construction can not in the exact same axis or axis angle or larger axial motion of 2 massive equiangular continuous rotary speed, and reliably transfer torque and movement.
It can be widely utilized in metallurgy, lifting, transportation, mining, petroleum, shipbuilding, coal, rubber, paper equipment, and other weighty equipment business machinery shaft in the transmission torque.

Illustrations of tags:
SWC490WF common coupling with out expansion flange, duration L=1560mm SWC490WF 1560 coupling JB/T5513-91
♦Basic Parameter and Main Dimension

Model  
 
D
 
 
 
Tn/
kN·m
 
 
Tf/
kN·m
 
 
β/
(°)
 
Lmin
D1
(js11)
D2
(H7)
D3 Lm n-d k t b
(h9)
g  
     I/kg·m²
   m/kg
Lmin 100mm Lmin 100mm
SWC180WF one hundred eighty 12.five six.three 25 560 a hundred and fifty five 105 114 one hundred ten 8-17 17 5 .248 .007 58 two.8
SWC225WF 225 forty 20 15 610 196 135 152 120 eight-17 twenty five 32 9 .636 .5714 ninety three four.nine
SWC250WF 250 63 31.5 fifteen 715 218 150 168 a hundred and forty eight-19 twenty five 6 forty twelve.5 one.352 .5717 143 5.3
SWC285WF 285 90 45 fifteen 810 245 one hundred seventy 194 160 eight-21 27 seven forty 15 two.664 .051 220 6.three
SWC315WF 315 a hundred twenty five sixty three fifteen 915 280 185 219 180 10-23 32 eight forty 15 four.469 .571 300 8
SWC350WF 350 one hundred eighty ninety fifteen 980 310 210 267 194 10-23 35 eight 50 16 7.388 .2219 412 fifteen
SWC390WF 390 250 125 fifteen 1100 345 235 267 215 ten-twenty five forty eight 70 eighteen thirteen.184 .2219 588 fifteen
SWC440WF 440 355 a hundred and eighty 15 1290 390 255 325 260 16-28 42 ten eighty twenty 23.25 .4744 880 21.7
SWC490WF 490 500 250 15 1360 435 275 325 270 16-31 forty seven 12 90 22.five forty.75 .4744 1173 21.seven
SWC550WF 550 710 355 fifteen 1510 492 320 426 305 16-31 50 12 one hundred 22.5 sixty eight.forty eight 1.357 1663 34
SWC620WF 620 a thousand five hundred fifteen 1690 555 380 426 340 ten-38 55 twelve 100 25 127.fifty three 1.357 2332 34

Be aware:
D= Tactical diameter Tn= Norminal Torque Tf= Torque allowed by exhaustion toughness below varible load 
β= Axis Angle 
kg.m²= Rotational inertia  Lmin= Minimum size soon after shortening( Inscrease 100mm) kg= Mass

♦Other Goods Record

Transmission Machinery 
Components Name
Product
Common Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
Higher Adaptable Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

♦Our Company
HangZhou CZPT Equipment Production Co., Ltd. is a engineering-dependent firm specializing in the design and style and manufacture of basic transmission parts and a variety of auxiliary non-regular tools accessories. The products are primarily utilised in metallurgy, electrical electricity, mining, chemical business, petroleum, papermaking, shipbuilding, weighty business, etc.

In a lot of industries, it has offered powerful complex and equipment assistance for numerous organizations all around the globe. At current, the goods are also exported to Russia, Italy, Spain, Brazil, Ukraine, Turkey, Australia, Singapore, Vietnam, Indonesia, Malaysia, Sri Lanka, and other countries and regions.

Welcome to customise products from our manufacturing facility and make sure you provide your design drawings or get in touch with us if you need to have other requirements.

♦Our Providers
one. Design and style Companies
Our design team has expertise in Cardan shafts relating to item design and style and advancement. If you have any wants for your new product or would like to make additional improvements, we are below to provide our assist.

two. Merchandise Services
uncooked components → Cutting → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

three. Samples Procedure
We could produce the sample according to your prerequisite and amend the sample consistently to fulfill your want.

four. Investigation & Development
We generally analysis the new requirements of the market place and produce the new design when there is new autos in the marketplace.

five. Quality Management
Every phase must be a unique examination by Expert Workers in accordance to the regular of ISO9001 and TS16949.

FAQ
Q 1: Are you a buying and selling business or a company?
A: We are a expert producer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Indeed, we can. We can do OEM & ODM for all the clients with tailored artworks in PDF or AI format.

Q 3:How lengthy is your delivery time?
Normally, it is 20-thirty times if the merchandise are not in inventory. It is according to amount.

Q 4: Do you provide samples? Is it cost-free or further?
Sure, we could offer the sample but not for free. Truly, we have a very good price tag basic principle, when you make the bulk buy the value of the sample will be deducted.

Q 5: How extended is your warranty?
A: Our Warranty is 12 months beneath normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection techniques for coupling?
A:one hundred% self-inspection ahead of packing.

Q 8: Can I have a go to to your factory ahead of the buy?
A: Sure, welcome to go to our manufacturing facility.

Q 9: What’s your payment?
A: T/T. 

Get in touch with Us
Insert: No.eleven HangZhou Street,Chengnan park,HangZhou City,ZheJiang Province,China
 

US $74.85-149,700
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model  
 
D
 
 
 
Tn/
kN·m
 
 
Tf/
kN·m
 
 
β/
(°)
 
Lmin
D1
(js11)
D2
(H7)
D3 Lm n-d k t b
(h9)
g  
     I/kg·m²
   m/kg
Lmin 100mm Lmin 100mm
SWC180WF 180 12.5 6.3 25 560 155 105 114 110 8-17 17 5 0.248 0.007 58 2.8
SWC225WF 225 40 20 15 610 196 135 152 120 8-17 20 5 32 9 0.636 0.0234 93 4.9
SWC250WF 250 63 31.5 15 715 218 150 168 140 8-19 25 6 40 12.5 1.352 0.0277 143 5.3
SWC285WF 285 90 45 15 810 245 170 194 160 8-21 27 7 40 15 2.664 0.051 220 6.3
SWC315WF 315 125 63 15 915 280 185 219 180 10-23 32 8 40 15 4.469 0.0795 300 8
SWC350WF 350 180 90 15 980 310 210 267 194 10-23 35 8 50 16 7.388 0.2219 412 15
SWC390WF 390 250 125 15 1100 345 235 267 215 10-25 40 8 70 18 13.184 0.2219 588 15
SWC440WF 440 355 180 15 1290 390 255 325 260 16-28 42 10 80 20 23.25 0.4744 880 21.7
SWC490WF 490 500 250 15 1360 435 275 325 270 16-31 47 12 90 22.5 40.75 0.4744 1173 21.7
SWC550WF 550 710 355 15 1510 492 320 426 305 16-31 50 12 100 22.5 68.48 1.357 1663 34
SWC620WF 620 1000 500 15 1690 555 380 426 340 10-38 55 12 100 25 127.53 1.357 2332 34

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS
US $74.85-149,700
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model  
 
D
 
 
 
Tn/
kN·m
 
 
Tf/
kN·m
 
 
β/
(°)
 
Lmin
D1
(js11)
D2
(H7)
D3 Lm n-d k t b
(h9)
g  
     I/kg·m²
   m/kg
Lmin 100mm Lmin 100mm
SWC180WF 180 12.5 6.3 25 560 155 105 114 110 8-17 17 5 0.248 0.007 58 2.8
SWC225WF 225 40 20 15 610 196 135 152 120 8-17 20 5 32 9 0.636 0.0234 93 4.9
SWC250WF 250 63 31.5 15 715 218 150 168 140 8-19 25 6 40 12.5 1.352 0.0277 143 5.3
SWC285WF 285 90 45 15 810 245 170 194 160 8-21 27 7 40 15 2.664 0.051 220 6.3
SWC315WF 315 125 63 15 915 280 185 219 180 10-23 32 8 40 15 4.469 0.0795 300 8
SWC350WF 350 180 90 15 980 310 210 267 194 10-23 35 8 50 16 7.388 0.2219 412 15
SWC390WF 390 250 125 15 1100 345 235 267 215 10-25 40 8 70 18 13.184 0.2219 588 15
SWC440WF 440 355 180 15 1290 390 255 325 260 16-28 42 10 80 20 23.25 0.4744 880 21.7
SWC490WF 490 500 250 15 1360 435 275 325 270 16-31 47 12 90 22.5 40.75 0.4744 1173 21.7
SWC550WF 550 710 355 15 1510 492 320 426 305 16-31 50 12 100 22.5 68.48 1.357 1663 34
SWC620WF 620 1000 500 15 1690 555 380 426 340 10-38 55 12 100 25 127.53 1.357 2332 34

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

What Is a PTO Shaft?

There are a few different types of PTO shafts. For example, there are German, Italian, and North American types. Moreover, there are several series options, such as cap-to-cap overall length, bearing diameter, and snap rings. Each type comes with different features and benefits, so it is important to select the correct one for your needs.

Power Take-Off

Shaft CollarThe Power Take-Off (PTO) shaft is a mechanical coupling system that couples an aircraft’s accessory gear box with an engine. It transmits high rpm and peak torque. It is an indigenously developed product, which has been cleared for flight fitment and successfully completed an engine ground run test. It is now being used by two Indian manufacturers.
There are four main types of PTOs. Semi-permanently mounted power take-offs are common on marine engines and industrial engines. These power take-offs are used to power secondary implements and accessories. In airplanes, accessory drives are also common. Jet aircraft use four different types of PTO units:
PTO shafts are composed of two telescoping pieces that slide into one another. This allows the user to lower and lift the implement. They are also equipped with universal joints, also known as U-joints. These joints allow flexibility and durability. These joints are held together by two yokes at each end of the shaft.
The speed of the power take-off shaft varies according to tractor size. Larger tractors turn the shaft at 1,000 revolutions per minute, while smaller tractors turn it at 540 revolutions per minute. This means that a person trapped in the open PTO shaft could be whipped around nine times in one second, while a person caught in a smaller tractor could be whipped around 16 2/3 times in one minute. Ultimately, the weight of the person could even cause the engine to stall.

Applications

PTO shafts have a variety of uses in the farm equipment industry. They can be connected to a wide variety of work equipment. For instance, a PTO is commonly used to power a hydraulic pump on a tractor’s front end. In such a case, a small shaft with a U-jointed design will attach to a yoke coupler and turn the pump. While this is not as universal as a tractor PTO, it still falls under the category of a PTO.
A PTO system will have a female coupling on one end and a male coupling on the other end. This essentially acts as an extension adaptor. It will transmit torque signals from the shaft to a static cover assembly to determine the speed and torque in both directions. In some cases, a PTO system will be able to record the data directly onto a PC or other electronic device.
In addition to power take-off systems, these systems can also provide power for auxiliary equipment. In addition, a split shaft PTO allows the power of one engine to power the axle of another vehicle. Depending on the engine’s power, a PTO may use either an air or hydraulic pump to power auxiliary equipment.
The PTO shaft is also useful for securing a tractor or equipment. This device features safety shields on both ends and fits securely inside the secondary shaft. The PTO shaft can be found in a variety of shapes. There are domestic-shaped and metric-shaped versions.

Safety precautions

Shaft CollarOperator awareness is key in preventing PTO shaft entanglement. It is important to avoid performing any repairs while the machine is operating. It is also important to avoid wearing loose or frayed clothing that could become entangled in the rotating shaft. It is also essential to read and follow the tractor’s operating manual. Also, ensure that the PTO shaft is only used for its intended purpose.
A power take-off, or PTO, is a type of attachment that transmits mechanical power from a tractor to another piece of farm machinery. Common examples include hay balers, rotary cutters, weed mowers, and forage blowers. These attachments are often equipped with protective shields to prevent entanglement. The shaft should always be covered when in use.
Operators should also avoid getting too close to the PTO shaft. The operator may become entangled if they accidentally approach the spinning shaft. They should also avoid wearing loose clothing because loose clothing can easily get caught in the stub and cause serious injury. These safety precautions are essential for safe operation of all farm machinery.
When using a PTO with heavy drive, it is important to use a heavy-duty model with a PTO shaft that is appropriate for the application. Alternatively, use a universal joint or wide-angle universal joint. These attachments can be a safer alternative to traditional PTOs. Draw-bar pins on trailed machines should be firmly secured to avoid damaging the PTO shaft. It is also recommended to guard all drive shafts on the machine.

Design

A PTO shaft has several advantages. It is a versatile power transmission that is ideal for heavy-duty equipment. Its design is rigid, yet flexible, allowing for high-speed operation. This is due in part to the splines, which prevent the parts from separating during operation.
The gears of a PTO drive are made from high-quality steel, which increases their durability. They are made from SCM 440 gear material. This material has a high tensile strength and a high yield point. It also has a high Young’s modulus of 206,000 N/mm2. Its Poisson’s ratio is 0.3, while its pressure angle is twenty degrees. In addition, its addendum and dedendum coefficients are both greater than 1.0.
Designed for use on industrial and marine engines, PTOs allow the driver to transfer power from a primary mover to a PTO-powered attachment. They are easy to install and offer improved service life and decreased downtime. In aircraft applications, PTOs are also common. Jet aircraft and agricultural equipment often use PTOs.
The PTO shaft’s dimensions are crucial for preventing vibration. It should extend at least 14 inches from the hitch point to the input shaft of the implement. In some cases, a shorter shaft may not fit the tractor, so it is important to choose the right size. If the PTO shaft is too short, it could cause the two parts to separate when the tractor is turning a corner.

Cost

Shaft CollarA PTO shaft is a very important part of a tractor because it transfers power to an attached attachment. These attachments typically include rotary tillers, brush cutters, hush hug, and mowers. While many attachments use a PTO shaft, the connection flange is not standardized. Some older models of tractors may have a connection flange that is closer to the tractor.
A PTO shaft will work with either a standard or a Weasler yoke. You can also choose from metric and North American models. There are also Italian PTO shafts. To ensure the best performance and durability, it is essential to ensure that the shaft is free of damage. To avoid such damage, a PTO shaft should be purchased from a reputable supplier.
PTO shafts are made from high-quality steel and feature a 1-3/8″ 6-spline at both the tractor and the implement end. In addition, splined PTO shafts are easy to replace and provide excellent horsepower. These PTO shafts can also increase a tractor’s work efficiency.
The cost of a PTO shaft replacement can vary. The average price range for a front-wheel-drive half-shaft is $470 to $940, and the cost for a rear-wheel-drive drive half-shaft replacement is about $1,600 to $2,000. The parts cost about two hundred dollars and the labor could take an hour or more.

Buying guide

If you’re looking to replace a PTO shaft on a lawn tractor, it’s important to consider several factors. First, the PTO shaft needs to be compatible with the tractor you plan to use it on. Then, you need to determine which size universal joint you need. To do this, you can use a PTO shaft size chart.
The PTO shaft is the component that transfers power from the tractor to the attached implement. It’s made up of several parts, including the internal and external PTO yoke, the universal joint, and the safety chain and shield. There are several types of PTO shafts available. You’ll want to choose the right size for your machine, as well as the number of PTO shafts you need.
A PTO shaft is essential for a tractor because without it, the tractor cannot drive. Understanding the PTO parts will help you operate farm machinery more effectively. For instance, if you’re buying a new Power Take Off shaft, you’ll want to look for one that’s compatible with the model and year of the tractor.
You’ll also need to consider the length of the PTO shaft. A PTO shaft can vary from 53 inches when compressed to 77 inches when fully extended. The most common length for a PTO shaft is about fifty-three inches, but you can also choose a longer one if you need more flexibility.
China Huading SWC Wf Type Flange Transmission Part Industrial Cardan Shaft No Length Compensation     pto shaft extensionChina Huading SWC Wf Type Flange Transmission Part Industrial Cardan Shaft No Length Compensation     pto shaft extension
editor by czh 2023-01-12