China Power Take off Axle Transmission Cardan Drive Pto Shaft for Flail Mower Truck with Clutch double knuckle pto shaft

Product Description

Merchandise Description

 

Materlal and Surface Remedy
Cross shaft Heat treatment method of 20Cr2Ni4A forging
Bearing cup 20CrMOTi forging heat remedy
Flange fork  ZG35CrMo metal casting
Spline shaft 42GrMo forging heat treatment
Spline bushing 35CrM0 forging heat remedy
Sleeve human body 42CrMo forging
Floor treatment method spraying
Flat key, positioning ring 42GrMo forging

 

 

Company Profile

 

In 2571, HangZhou CZPT Machinery Co.,ltd was set up by Ms. Iris and her 2 associates(Mr. Tian and Mr. Yang) in HangZhou city(ZHangZhoug province, China), all 3 Founders are engineers who have a lot more than averaged thirty years of encounter. Then because the needs of organization growth, in 2014, it moved to the existing Xihu (West Lake) Dis. Industrial Zone (HangZhou metropolis, ZHangZhoug province, China).

By way of our nicely-known brand ND, CZPT Machinery delivers agricultural answers to agriculture equipment producer and distributors throughout the world by way of a entire line of spiral bevel gearboxes, straight bevel gearboxes, spur gearboxes, travel shafts, sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and many others. Items can be custom-made as ask for.

We, CZPT machinery set up a complete good quality administration system and revenue provider network to supply clients with high-good quality merchandise and satisfactory service. Our items are marketed in 40 provinces and municipalities in China and 36 countries and regions in the entire world, our major market place is the European industry.

Certifications

 

Our Factory

 

Sample Space

 

Why decide on us?

one) Customization: With a robust R&D group, and we can develop products as needed. It only takes up to 7 days for us to layout a established of drawings. The production time for new goods is normally 50 times or considerably less.

two) High quality: We have our possess complete inspection and tests tools, which can make certain the top quality of the merchandise.

3) Capability: Our annual manufacturing capability is over 500,000 sets, also, we also accept small amount orders, to satisfy the demands of different customer’s acquire quantities.

4) Service: We target on offering large-high quality goods. Our goods are in line with worldwide standards and are mostly exported to Europe, Australia, and other nations around the world and areas.

5) Shipment: We are near to HangZhou and ZheJiang ports, to supply the speediest delivery services.
 

Packaging & Shipping and delivery

 

FAQ

Q: Are you a investing firm or manufacturer?
A: We’re factory and providing gearbox ODM & OEM solutions for the European industry for far more than 10 many years

Q: Do you offer samples? is it totally free or extra?
A: Indeed, we could supply the sample for free cost but do not pay out the price of freight.

Q: How lengthy is your supply time? What is your terms of payment?
A: Normally it is 40-forty five times. The time could vary dependent on the solution and the stage of customization.
For common goods, the payment is: thirty% T/T in advance,balance before cargo.

Q: What is the specific MOQ or price tag for your item?
A: As an OEM organization, we can provide and adapt our products to a vast selection of needs.
Thus, MOQ and value could significantly range with measurement, material and further technical specs For instance, expensive merchandise or normal goods will generally have a reduced MOQ. Remember to contact us with all pertinent particulars to get the most accurate quotation.

If you have an additional concern, remember to feel free of charge to contact us.

US $70
/ Piece
|
50 Pieces

(Min. Order)

###

After-sales Service: Repair
Condition: New
Color: Red, Silver, Yellow, Black
Certification: CE, ISO
Type: Universal Joint
Application Brand: Agricultural Machine

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Materlal and Surface Treatment
Cross shaft Heat treatment of 20Cr2Ni4A forging
Bearing cup 20CrMOTi forging heat treatment
Flange fork  ZG35CrMo steel casting
Spline shaft 42GrMo forging heat treatment
Spline bushing 35CrM0 forging heat treatment
Sleeve body 42CrMo forging
Surface treatment spraying
Flat key, positioning ring 42GrMo forging
US $70
/ Piece
|
50 Pieces

(Min. Order)

###

After-sales Service: Repair
Condition: New
Color: Red, Silver, Yellow, Black
Certification: CE, ISO
Type: Universal Joint
Application Brand: Agricultural Machine

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Materlal and Surface Treatment
Cross shaft Heat treatment of 20Cr2Ni4A forging
Bearing cup 20CrMOTi forging heat treatment
Flange fork  ZG35CrMo steel casting
Spline shaft 42GrMo forging heat treatment
Spline bushing 35CrM0 forging heat treatment
Sleeve body 42CrMo forging
Surface treatment spraying
Flat key, positioning ring 42GrMo forging

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

Shaft CollarA 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft CollarThe PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft CollarThe PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China Power Take off Axle Transmission Cardan Drive Pto Shaft for Flail Mower Truck with Clutch     double knuckle pto shaftChina Power Take off Axle Transmission Cardan Drive Pto Shaft for Flail Mower Truck with Clutch     double knuckle pto shaft
editor by czh 2023-01-22