how to evaluate hydraulic cylinder?

To measure a China hydraulic cylinders supplier cylinder, you will need to have a several basic applications this sort of as a tape measure or calipers. In this article are the steps to measure a hydraulic cylinder:

1. Decide the Length: Evaluate the overall length of the cylinder by measuring from the center of 1 mounting hole to the middle of the opposite mounting hole. This will give you the stroke length of the cylinder.

two. Evaluate the Bore Size: The bore dimension refers to the internal diameter of the cylinder barrel. It is essential to measure the bore correctly as it determines the pressure and capability of the cylinder. Use calipers or a micrometer to evaluate the diameter of the cylinder bore. Ensure that you measure across the center of the cylinder bore and not the worn or destroyed spots.

three. Measure the Rod Sizing: The rod measurement refers to the diameter of the piston rod. Measure the diameter of the rod employing calipers or a micrometer. Once more, evaluate throughout the heart of the rod and not any worn or destroyed spots.

4. Evaluate the Rod Duration: Measure the duration of the piston rod from the heart of the piston to the conclude of the rod.

5. Test Mounting Style: Observe the mounting type of the cylinder, no matter if it is flange-mounted, clevis-mounted, or other varieties. This information is vital when replacing or picking out a cylinder.

6. Verify Seal Form: Discover the variety of seals utilised in the cylinder, these kinds of as piston seals, rod seals, or wiper seals. This information is crucial when purchasing substitution seals.

It is important to measure hydraulic cylinders properly to make certain appropriate fit and general performance. If you are uncertain or need to have support, it is proposed to seek the advice of the manufacturer’s documentation or find help from a hydraulic expert to ensure correct measurements and good alternative.